精准石油论坛: 海底储油舱的波浪载荷计算 - 精准石油论坛

跳转到内容

第一页
  • 您无法发起一个新主题
  • 您无法回复此主题

海底储油舱的波浪载荷计算 主题评价: -----

#1 已离线   Mooring 

  • 一介布衣
  • 图像
  • 群组: 认证会员
  • 主题数: 79
  • 注册日期: 11-19-2007

Mooring 发表于 01-01-2012 - 13:38
精准.石油.论坛 forum.petro-china.com

现有一120米*80米*16米的储油舱,放在海底,水深在波长的一半以内的情况下,用hydroD里的FIXED计算波浪载荷靠谱吗?
精准.石油.论坛 forum.petro-china.com






----
来源: 精准石油论坛 - 推进信息共享,提升科技水平
0

#2 已离线   Mooring 

  • 一介布衣
  • 图像
  • 群组: 认证会员
  • 主题数: 79
  • 注册日期: 11-19-2007

Mooring 发表于 01-01-2012 - 13:39
精准.石油.论坛 forum.petro-china.com

简单的算了下,水平载荷在3-4万千牛,垂向载荷在17万千牛,感觉这个值应该是有问题的。

不知道有没有高人做过这方面的研究。
精准.石油.论坛 forum.petro-china.com






----
来源: 精准石油论坛 - 推进信息共享,提升科技水平
0

#3 已离线   candit 

  • 职业侠客
  • 图像
  • 群组: 认证会员
  • 主题数: 263
  • 注册日期: 04-24-2008

candit 发表于 01-04-2012 - 02:41
精准.石油.论坛 forum.petro-china.com

Water-depth is less than half the wavelenght means that it can not be considered as deepwater. Then the results is sensitive to how shallow your water is. I would think that the results are OK as long as your water is not too shallow.
精准.石油.论坛 forum.petro-china.com






----
来源: 精准石油论坛 - 推进信息共享,提升科技水平
0

#4 已离线   candit 

  • 职业侠客
  • 图像
  • 群组: 认证会员
  • 主题数: 263
  • 注册日期: 04-24-2008

candit 发表于 01-04-2012 - 02:42
精准.石油.论坛 forum.petro-china.com

Further, the amplitudes of loads must be related to a specific wave frequency.
精准.石油.论坛 forum.petro-china.com






----
来源: 精准石油论坛 - 推进信息共享,提升科技水平
0

#5 已离线   Mooring 

  • 一介布衣
  • 图像
  • 群组: 认证会员
  • 主题数: 79
  • 注册日期: 11-19-2007

Mooring 发表于 01-04-2012 - 11:32
精准.石油.论坛 forum.petro-china.com

查看主题引用框(candit @ 01-04-2012 - 02:41)

Water-depth is less than half the wavelenght means that it can not be considered as deepwater. Then the results is sensitive to how shallow your water is. I would think that the results are OK as long as your water is not too shallow.



选取21米波高,周期14.5确定的波浪载荷。
这种计算是假定6个面全是湿表面,实际上与海地接触的那个面应该不能作为湿表面,但是在软件里好像这种方法是实现不了的。
垂向载荷太大,平台要起来了
精准.石油.论坛 forum.petro-china.com






----
来源: 精准石油论坛 - 推进信息共享,提升科技水平
0

第一页
  • 您无法发起一个新主题
  • 您无法回复此主题